Panasonic Toughbook CF-08TX1A1M Operating Instructions Manual page 34

LCD (Touchscreen)
Handling the Touchscreen
Use the provided stylus with CF-08. Do not use an implement other than the
stylus that comes with the wireless display.
Do not place any object on the surface or press down forcefully with sharp-
pointed objects (e.g., nails), or hard objects that can leave marks (e.g., pencils
and ball point pens).
Do not operate the wireless display when such things as dust are on the LCD.
Do not allow substances such as oil to contact the LCD. The cursor may not
work properly in such cases.
Aligning the touchscreen
Align the touchscreen if the cursor does not correctly move to the position where
the stylus touches the touchscreen of the wireless display.
A Double-tap
B Tap the [Calibration] tab, and tap [Recalibrate].
Rotating the screen
To rotate the screen, perform the following procedure.
A Double-tap
B Double-tap [Rotate].
C Add the check mark for [0 degrees (Landscape)], [90 degrees], [180
degrees] or [270 degrees], and tap [Rotate].
The screen will rotate to the position selected.
Using the following procedure, you can set the screen to rotate to a preset position
with the press of a single button.
Here, we will explain how to make the following settings:
• Button to be used/push length: keyboard button/long push
• Setting angles: [0 degrees (Landscape)] and [90 degrees]
34
on the desktop, and double-tap [Stylus].
on the desktop.