Canon imagePROGRAF TZ-5300 Quick Manual page 3

Hide thumbs Also See for imagePROGRAF TZ-5300:
Table of Contents

Advertisement

Power Supply
Keep the area around the power outlet clear of items so
that you can disconnect the power cable immediately.
Always grip the plug to remove the power cord from the
power outlet. Pulling on the power cord could damage
the cord.
Never use an extension cord.
A power cord shall be connected to a socket-outlet with
earthing connection in order to prevent electric shock.
Handling
Never insert your hand into the printer while it is
printing.
Never place items on top of the printer. In particular,
never place small metal objects (paper clips, staples,
etc.), liquids, any type of liquid container that contains
flammable solvents (alcohol, thinner, etc.) on the printer.
When using the printer, do not tilt it, stand it on its side,
or turn it upside down. There is a risk of the ink spilling.
When transferring the printer tilted, always perform the
steps in "Preparing to Transfer the Printer" in order to
protect the internal structure.
Refer to the Online Manual for "Preparing to Transfer the
Printer".
Connect the interface cable correctly. To avoid damage,
before connection make sure that the shape of the
cable connector matches the connection point on the
printer.
During printing, turn on the ventilation system in the
room.
Print Head, Ink Tanks, or Maintenance
Cartridge
Always store consumables out of the reach of small
children. If a child licks or ingests ink accidentally, wash
out their mouth or make them drink 1 or 2 cups of
water. If irritation or discomfort occurs, consult a doctor
immediately.
If ink accidentally gets in your eyes, immediately rinse
with water. If ink gets on your skin, immediately clean it
off with soap and water. If irritation persists in your eyes
or on your skin, contact a physician immediately.
Never touch the electrical contacts of the print head
after printing. It may be hot.
Never throw ink tanks in a fire.
Never disassemble or modify the print head or ink tanks.
Avoid dropping or shaking the print head, ink tanks, and
maintenance cartridge.
Legal Notices
Copyright
Unauthorized reproduction of this user manual in whole
or part is prohibited.
Legal Notice
It is illegal to reproduce currency, bills, negotiable
securities and other documents prohibited by law.
Reproduction of such items may be subject to criminal
prosecution.
It is illegal to reproduce legal certificates, licenses, travel
tickets, and certain public and private documents
prohibited from reproduction by law. Reproduction of
such items may be subject to criminal prosecution.
Please note that intellectual property protected by
copyright may not be reproduced without the express
permission of the copyright holder except for personal
or household use under limited circumstances.
Cautions When Requesting Repairs, Leasing,
Transferring Ownership, and Disposing of the
Printer
If personal information is registered with the printer or
security information such as passwords are set on the
printer, that information may remain inside the printer.
To prevent information leaks, reset the settings (to the
factory default state), before the printer is temporarily out
of your hands such as for getting it repaired or leased,
or before the printer is transferred to another owner or
disposed of. For instructions, refer to "When Repairing,
Lending, or Disposing of the Printer" in the Online Manual.
Trademarks
QR Code is a registered trademark of DENSO WAVE
INCORPORATED in Japan and in other countries.
3

Advertisement

Table of Contents
loading

Table of Contents