Error Codes And Troubleshooting - Hoover HF9 User Manual

7. ERROR CODES & TROUBLE SHOOTING
The following is a list of error codes & solutions that your product will identify and indicate on your LED
display should you product encounter problems:
ERROR
CODE
1. Press bin release button to remove the bin.
2. Reassemble the pre motor filter in the correct position.
Check if there is any obstruction in the nozzle.
Go to section 7.3 and carry out ALL maintenance
There is a technical issue in the battery pack.
Remove the battery from your product and contact your
Check if the window nozzle is correctly assembled in the
1. Make sure the window is in place correctly.
2. Press the window down gently to click it in securely.
There is a technical issue in the main nozzle.
Switch off your product and wait for 20mins.
If the product still does not work, Contact your local Hoover
E5 indicates there is a blockage in your product.
Go to section 7 and carry out ALL maintenance requirements,
Empty the bin, clean the filters, clean the nozzle & brushbar
There is a technical issue in the main vacuum.
Please ensure you are using a genuine HOOVER charger.
If the problem persists, stop using your product and contact
There is a technical issue in the main vacuum.
Switch off your product and wait for 20mins.
If the problem persists, stop using your product and contact
E9 indicates there is a blockage in the mini turbo nozzle.
Go to section 7.4 and perform the indicated maintenance
FAULT & SOLUTION
The pre motor filter is missing!
3. Reassemble the bin.
requirements.
local Hoover service centre.
nozzle.
service centre.
and check for blockages.
Stop using your product.
Contact your local Hoover service centre.
There is a technical issue in the charger.
your local Hoover service centre.
your local Hoover service centre.
task.
12
GB