Hoover HF9 User Manual page 10

7. CLEANER MAINTENANCE
7.3 FLOOR NOZZLE
Thanks to ANTI-TWIST, your Hoover vacuum features an integrated comb which radically reduces hair wrapping
around the brushbar. However, if your cleaner is not picking up efficiently your brushbar may need to be cleaned.
1. Switch off your product.
2. Unlock the nozzle window sliding the nozzle window release latch and remove.
3. Using the brushbar release latch, remove the brushbar from the nozzle.
4. Remove any excess debris from the brushbar.
5. Check for and remove any large debris from inside the nozzle.
6. Carefully check for and remove any tangled debris from the comb.
7. Refit the brushbar to the nozzle ensuring the latch is fully in place.
8. Refit the nozzle window by locating at the front of the nozzle and closing firmly into location.
IMPORTANT: Ensure the window is fully closed. If the nozzle window is not correctly reassembled,
the nozzle LED lights will flash, the brushbar status light will turn red and error E03 will appear on
the user interface.
1
7
7. CLEANER MAINTENANCE
7.4 MINI-TURBO NOZZLE*
1. Switch off your product.
2. Remove the mini-turbo nozzle from your product and turn over.
3. Using a coin, open the brushbar release lock and remove the brush bar.
4. Using scissors, remove any tangled fibres or debris from the brushbar.
5. Look inside the nozzle and remove any debris.
6. Refit the brushbar into the nozzle and using a coin, lock into position.
1
*Dependant on your model.
2 3
8
2 3
4
4
10
5 6
5 6
GB