Wet Pick Up Operation - Shop-Vac SL Series User Manual

28. Slide the inlet deflector with
the filter bag attached into the
deflector guide. (FIGURE 20)
FIGURE 20
29. Reinsert hose into inlet and
tighten the locking nut.
(FIGURE 21)
FIGURE 21
30. When secured in place, expand
the filter bag and position
around the inside of the tank.
Replace tank cover.
NOTE: When removing filter bag
from tank, remove the inlet defector
from the filter bag collar. Reinstall
inlet deflector into deflector guide.
Inlet deflector must be in place for
any type of cleaning.
WARNING!
FOR FINE DUST POWDERS:
When vacuuming fine dust, or
powders of any kind (plaster,
drywall dust, cold ashes,
concrete dust, etc.) a high
efficiency drywall filter bag
must be used. When vacuuming
normal household dust and
debris, standard household
disposable filter bags may be
used.
WET PICK UP
OPERATION
31. Your vacuum can be used for
wet pick up. Remove ALL dirt
and debris found in the tank.
Remove all dry use only filters,
including the filter bag, from
the vacuum.
32. A clean cartridge filter may be
used to pick up small quantities
of liquid. To use the cartridge
filter; follow the cleaning and
installation instructions under
dry pick up.
33. For vacuuming large quantities
of liquid use a foam sleeve
(Not standard with all
models). A foam sleeve may
be purchased at your local
Shop-Vac® distributor, on the
Shop-Vac® website, or by
contacting Shop-Vac customer
12 Eng.