Safety Information - Kobalt KBB 7580-06 Manual

SAFETY INFORMATION

WHEN USING THIS BLOWER
•
gases, or dust. Power tools create sparks that may ignite the dust or fumes.
• To reduce the risk of electric shock, the battery charger has a polarized plug (one blade is wider than
electrician to install the proper wall outlet. Do not change the equipment plug, extension cord
receptacle, or extension cord plug in any way.
• Never allow children to operate the equipment. Never allow adults to operate the equipment without
proper instruction.
• Wear eye protection that is marked to comply with ANSI Z87.1 when operating this product.
• Do not handle charger, including charger plug, and charger terminals with wet hands.
• Do not charge the unit outdoors.
• Wear heavy long pants, boots, and gloves. Avoid loose garments or jewelry that could get caught in
moving parts of the machine or its motor.
• Do not force the tool. Use the correct tool for your application. The correct tool will work more
• Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear.
• Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.
• Secure long hair so it is above shoulder level to prevent entanglement in any moving parts.
•
• Do not use the tool if the switch does not turn it on or off. Any tool that cannot be controlled with the
switch is dangerous, and must be repaired.
• Keep all bystanders, children, and pets at least 50 ft. (15 m) away.
• For household use only.
• Use only Kobalt 80-volt batteries. (KB 280-06, KB 2580-06, KB 380-06, KB 280C-06, KB 2580C-06,
KB 380C-06)
• Use only Kobalt 80-volt charger. (KRC 80-06, KRC 30-06, KRC 0280-06)
•
• Do not operate in poor lighting.
• Keep all parts of your body away from any moving parts and all hot surfaces of the unit.
• Do not put any object into openings. Do not use with any opening blocked. Keep openings free of dust,
• Check the work area before each use. Remove all objects that can be thrown or become entangled in
the machine, such as rocks, broken glass, nails, wire, or string.
• Use only identical manufacturer's replacement parts and accessories. Use of any other parts may
create a hazard or cause product damage.
7