Connection Guide - Strong epic LEAP-S1 Self-Installation Manual

CONNECTION GUIDE

Refer to the diagram below for connecting your Android TV Box to power,
network and other devices. (Note: Before getting started, please turn off
all devices to be connected.)
1
0
POWER 12V 1A
NOTE: The LEAP-S1 box also supports Wi-Fi. To connect, go to Settings ->
Network.
1. Connect the LEAP-S1 box to your television via the HDMI Cable.
2. Using an Ethernet Cable, connect the LAN Port of the TV Box to the
LAN Port of your router or home broadband network.
3. Connect the TV Box to power using the power adapter provided.
You can then power on your device and begin.
NOTE: Before turning on your device, please switch the signal input of the
TV to the correct source.
8
LAN HDMI AV SPDIF IR