Murdock A191.8-BF Series Installation & Maintenance Instructions Manual

Barrier Free, Wall Mounted Chilled Drinking Fountain
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER:
IMPORTANT: INSTALLATION FOR FREEZE RESISTANT OPTION "-FRA" WILL DIFFER FROM STANDARD!
REFER TO DESIGNATED FREEZE RESISTANT INSTALLATION DETAILS PRIOR TO ROUGH-IN AND FIXTURE
INSTALL -FRA SERIES OPTIONS. FOR ADDITIONAL INFORMATION VISIT:
OR CONTACT YOUR LOCAL SALES REPRESENTATIVE.
NOTES TO INSTALLER:
1. Please leave this documentation with the owner of the fixture when finished.
2. Please read this entire booklet before beginning the installation.
3. Check your installation for compliance with plumbing, electrical and other applicable codes.
Murdock warrants that every cooler, bottle filling station, packaged water chiller, fountain and accessory to be free from defects
in material and workmanship under normal use for one (1) year from date of install or eighteen (18) months after the date of
shipment from the factory, whichever comes first.
Murdock warrants the compressor and hermetically sealed refrigeration system, including cooling coil assembly when part of
the hermetically sealed refrigeration system, to be free from defects in material and workmanship under normal use for an
additional four (4) years from the end of the one (1) year period described above.
This warranty does not cover installation or labor charges and does not apply to materials, which have been damaged by other
causes such as mishandling or improper care or abnormal use. The repair or replacement of the defective materials shall
constitute the sole remedy of the Buyer and the sole remedy of Murdock under this warranty. Murdock shall not be liable under
any circumstances for incidental, consequential or direct charges caused by defects in the materials, or any delay in the repair or
replacement thereof. This warranty is in lieu of all other warranties expressed or implied. Product maintenance instructions are
issued with each unit and disregard or non-compliance with these instructions will constitute an abnormal use condition and
void the warranty. Stainless steel must be protected on job site during construction and must be properly maintained after the
water has been introduced into the water cooler or drinking fountain, or Murdock's limited warranty is void.
LIMITED EXPORT WARRANTY - One year on parts only.
Murdock assumes no responsibility for use of void or
suspended data. © Copyright Murdock, City of
Industry, CA Member of Morris Group International.
Please visit www.murdockmfg.com for most
current specifications.
7021-033-001
Date: 10/04/2021
CONTEMPORARY WATER COOLERS DRINKING FOUNTAINS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
A191.8-BF Series
with Bottle Filler and Trim Panel
1.800.591.9360
Technical Assistance Fax: 1.626.855.4894
LIMITED WARRANTY - UNITED STATES & CANADA
www.MurdockMfg.com/Resources
Federal
Public Law
111-380
(No Lead)
15125 Proctor Ave, City of Industry,
Member of
CA, 91746 U.S.A.
Phone 800-591-9360
626-336-4561
Fax 626-855-4894
www.murdockmfg.com