Download Print this page

Murdock A131 8-VR Series Installation And Maintenance Instructions Manual

Barrier free, wall mounted electric drinking fountain with vandal resistant button

Advertisement

Quick Links

Barrier Free, Wall Mounted Electric Drinking Fountain
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER:
Technical Assistance E-Mail: Fieldservice@acorneng.com
NOTES TO INSTALLER:
1. Please leave this documentation with the owner of the fixture when finished.
2. Please read this entire booklet before beginning the installation.
3. Check your installation for compliance with plumbing, electrical and other applicable codes.
For current Warranty click hyperlink
®
Murdock assumes no responsibility for use of
void or superseded data. © Copyright Murdock
Mfg., City of Industry, CA Member of Morris
Group International. Please visit
www.murdockmfg.com
for most current
specifications.
7021-016-001
1 of 9
01/26/24 A
CONTEMPORARY WATER COOLERS
DRINKING FOUNTAINS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
A131.8-VR Series
with Vandal Resistant Button
A131408F-VR / A131408S-VR
1.800.743.8259
Product Warranty
or visit: www.murdockmfg.com/terms-and-warranty
** U.S. DESIGN PATENT D545,607 (Bowl Design)
Federal
Federal
Public Law
Public Law
111-380
111-380
(No Lead)
(No Lead)
Member of
15125 Proctor Ave, City of Industry,
CA, 91746 U.S.A.
Phone 800-591-9360
626-336-4561
www.murdockmfg.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the A131 8-VR Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Murdock A131 8-VR Series

  • Page 1 3. Check your installation for compliance with plumbing, electrical and other applicable codes. For current Warranty click hyperlink Product Warranty or visit: www.murdockmfg.com/terms-and-warranty ® Murdock assumes no responsibility for use of Federal Federal void or superseded data. © Copyright Murdock Public Law Public Law Mfg., City of Industry, CA Member of Morris...
  • Page 2: General Notes

    3 inches. Provide clear floor space as required. Adjust vertical dimensions as required to comply with federal, state, and local codes. MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 •...
  • Page 3: Prior To Installation

    Murdock Mfg. 10. Fixture operates within water pressure range of 174 kPa (25 psig) to 724 kPa (105 psig). Murdock Mfg. will not warranty chiller damaged when connected to supply lines with flow pressure lower than 174 kPa (25 psig) or higher than 724 kPa (105 psig).
  • Page 4: Installation Instructions

    IN FRAME AND USE SHEETMETAL SCREWS 4 PROVIDED. SEE ANCHORING CLIP DETAIL. & TRIM PANEL 7 TO SECURE. MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 • www.murdockmfg.com 7021-016-001 Date: 01/26/2024 A A131.8-VR...
  • Page 5: Troubleshooting

    If all components check positive for continuity then test the wiring harness plug for continuity to see if there is a broken wire within the wiring harness insulation. MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 •...
  • Page 6 Sensor is picking up a highly reflective surface. Eliminate cause of reflection and wait 30 seconds before checking. f. Replace Sensor. MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 • www.murdockmfg.com...
  • Page 7 Maintenance Tool -Cartridge Retaining Nut -Strainer Plug -Removal of P.E. Tubing from Push-in Fittings MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 • www.murdockmfg.com 7021-016-001 Date: 01/26/2024 A A132.8-VR...
  • Page 8 While holding the collet in, pull on the PE tubing to remove from the push-in fitting. COLLET MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 • www.murdockmfg.com...
  • Page 9 7003-093-001 Flow Restrictor - Low-Flow Bubbler Only 7003-195-000 Spring, Overtravel Repairs must be made with Murdock Manufacturing parts only. Please order through your local representative or distributor. The phone number to locate your local representative is 1.800.591.9360. MURDOCK MFG. • 15125 Proctor Avenue • City of Industry, CA 91746 USA Member of Phone 800-453-7465 or 626-333-2543 •...

This manual is also suitable for:

A131408f-vrA131408s-vr