Ready For Switching On; Mains Connection - Megger SWG 500 Operating Manual

Shock discharge generator
Table of Contents

Advertisement

6

2.6.3 Ready for switching on

Indicated by a red pilot lamp (5).
Instrument is on.
Green pilot lamp goes out.
Caution: HIGH VOLTALE IS ON !
*NOTE:
If the green pilot lamp goes out and the red pilot lamp does
not light up, the instrument is also ready for switching on!!
2.7

Mains connection

The earthed power supply lead supplied is connected to
socket (14). The mains voltage should be 220 - 240 V. A
mains frequency of 45 - 60 Hz is permissible.

Advertisement

Table of Contents
loading

Table of Contents