Janome JP-104 Operation Manual page 19

●
Press the [MODE] key, select [Adjustment]
and press the [ENTR] key.
●
Select [Load CalAmnt Offset] and press
the [ENTR] key.
●
The screen will display the optimum value
for the offset. Press the [ENT] key to apply
the displayed value to offset those set at
the factory.
●
You can also enter a number for the
calibration amount.
Note:
When you enter a calibration amount, do not enter a number that is too large.
If the number entered is too large, it can lead to malfunction of the Electro Press.
If any malfunction occurs, contact Janome Sewing Machine Co., Ltd. (Industrial Automation
Systems Division) or your dealer.
Maintenance
Maintenance Mode Menu
Adjustment
Version Information
Setting Information
Diagnostic Mode
Mechanical Adjustment Mode
Adjustment
Adjustable Value List
Position Offset
Load Calibration
Clear Load Calibration
Position Adjustment
Clear Position Adjustment
Measure of Strain
Load CalAmnt Offset
Load Calibration (Number)
Enter a number.
Load CalAmnt Offset
9
-0.5 kg
Electro Press JP Series 4