Janome JP-104 Operation Manual page 13

[Back Up]
Back up data in case of accident.
To create backup data, start up the program "JP Designer Limited Edition" included in the
Operation Manual CD-ROM. Retrieve data from the machine and save the retrieved data in a
file.
The teaching data is sent from machine to PC as a unit. You cannot send a single program on
it's own.
Storage area
The machine has a data storage area and a work area. When you start up the machine, the
teaching data in the storage area will be copied to the work area. The copied data is used for
running and teaching. The data in the work area will be deleted when the power to the machine
is turned OFF.
When data is retrieved from the machine it comes from the work area. When data is sent to the
machine from the PC, it is saved in the storage area automatically.
 If you are using "JP Designer", the same operation can also be executed by selecting
[Receive Data] from the [Communication] pull-down menu.
Maintenance
<Electro Press>
Work area
Data
Receive/Send
3
<PC>
Backup Data
Electro Press JP Series 4