Zontes ZT350E Maintenance Manual page 107

c. Use 6# inner hexagon to remove the left and right
handles and switch components.
d. Wrap the handle assembly with a bubble bag to prevent
the cover from being scratched. Use a one-word batch to
cover the non-woven fabric, and remove the upper cover in
the direction.
e. Remove 3 bolts with 6# inner hexagon, and take off the
spring washers and flat washers.
f. Pull out the cable fixed on the steering handle. Remove
the steering handle.
g. Use the 4# inner hexagon to remove the bolts on the left
and right storage box brackets.
h. Unplug all the wire harnesses on the PKE and tidy up the
wire harnesses
i.Open the buckle and remove the OBD diagnostic
connector
j. Use 4# inner hexagon to remove 2 M6×14 bolts ⑵, use
6# inner hexagon to remove 2 M6×25 bolts ⑴ to fix the
main lock, and pull out the main lock connector.
107 / 109