Table of Contents
Advertisement
IN STALLATIO N
2
CO N N ECT VID EO RECO RD ER TO TV
Place the recorder on a stable, flat surface.
Aerial connector
21-pin AV input connector
(SCART)
RF CO N N ECTIO N
To Connect To A TV With NO 21-pin AV input connector
(SCART) . . .
1– Disconnect the TV aerial cable from the TV.
2– Connect the TV aerial cable to the ANT. IN jack on the rear
panel of the recorder.
3– Connect the provided RF cable between the RF . OUT jack
on the rear panel of the recorder and the TV's aerial
connector.
ATTEN TIO N
Do NOT Plug the mains power cord into a mains outlet until all connections are completed.
Do NOT press the
power before you start the Auto Set Up procedure described on page 6.
Downloaded from:
https://www.usersmanualguide.com/
Back of TV
Mains Power Cord
Mains outlet
button on the recorder or on the remote control to turn on the recorder's
RF Cable (provided)
21-pin SCART Cable
(not provided)
Make this
connection if
your TV has a
21-pin AV input
connector (SCART) in
order to reduce the
possibility of interference.
And if you are using a stereo
TV, you will need this cable
in order to enjoy stereo
playback of videotapes.
ENTREE/DECODEUR
AV2
IN/DECODER
AV CO N N ECTIO N
To Connect To A TV With 21-pin AV input connector
(SCART) . . .
1– Connect the aerial, recorder and TV as per " RF
CONNECTION" .
2– Connect an optional SCART cable between the AV1 IN/OUT
connector on the rear panel of the recorder and the TV's
21-pin AV input connector (SCART).
AFTER YOU FINISH THIS STEP
TV Aerial Cable
(not provided)
ENTREE
ANT. IN
SORTIE
OUT
ENTREE/SORTIE
AV1
ANTENNE
R
IN/OUT
SORTIE
RF OUT
AUDIO
L
Back of Recorder
Go to Step 3 – AU TO SET U P
5
Advertisement
Table of Contents
