Support Plate - Sony Xperia ZR Working Instructions

Disassembly
3.5

Support Plate

Remove the 6 screws holding the Support Plate by using a
screwdriver with Bits (JCIS No 0).
Scrap! Not to be reused!
Push the Support Plate from the battery side to make a gap
between the Support Plate and the Cover Main Assy.
Insert a Guitar Pick just below the On/Off button (between
the areas marked in red on the picture below).
Do not damage the Cover Main!
Loosen the adhesive marked on the picture by sliding the
Guitar Pick to each side.
Do not damage the Cover Main!
Loosen the adhesive marked on the picture by inserting the
Battery Removal Tool.
Do not damage the Cover Main!
When the all the adhesive is loosened, lift the long side of
the Support Plate to make it free from the Cover Main.
1273-7033 Rev 1

Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
11(71)