Disassembly
4.31 Label Mobile Phone
Follow the 3.1 and 3.2 Disassembly instructions!
Prepare a new Label Mobile Phone!
Follow the 5.12 – 5.13 Reassembly instructions!
REMOVAL
Read the old Label Core Unit and write the information into
the ''LabelPrint Solution' program.
Carefully remove the Label by using a Nylon Pointer.
Scrap Label Mobile Phone, not to be reused!
Remove and clean any remaining adhesive residue
found on Support Plate!
INSTALLATION
Check that the proper label format is loaded in the Zebra
printer and write a new Label by using the 'LabelMake'
software.
One label only is allowed!
1273-7033 Rev 1
Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
42(71)