Replacement
4.33 Liquid Indicator
Follow the 3.1 – 3.8 Disassembly instructions!
Prepare a new Liquid Indicator.
Follow the 5.2 – 5.9 Reassembly instructions!
REMOVAL
Detach to remove the Liquid Indicator by using a Flex Film
Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Attach a new Liquid Indicator in its proper position by using a
Flex Film Assembly Tool as shown in picture.
Note position of the Liquid Indicator! Make sure the
Liquid Indicator is aligned to the top left corner of the rib.
Do the same to this Liquid Indicator.
1290-1182 Rev 4
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
47(72)