Replacement
4.30 Core Unit label
Follow the 3.1 – 3.8 Disassembly instructions!
Prepare a new Core Unit label.
Follow the 5.2 – 5.9 Reassembly instructions!
REMOVAL
Read the old Core Unit Label and/or write the information
into the 'Label Print Solution' program before removal.
Carefully remove the Core Unit Label by using the Flex Film
Assembly Tool.
Scrap! Not to be reused!
INSTALLATION
Check that the label format is properly loaded in the Zebra
printer and write a new Label using the 'Label Print Solution'
software.
Attach a new Core Unit Label in its proper position as
shown in picture.
Attach a new Core Unit Label in its proper position as
shown in picture.
1290-1182 Rev 4
©
Sony Mobile Communications AB – Company Internal
Working Instructions (mech)
44(72)