Advertisement
Attach the assembled Center Support Rail (E) with Support Leg (F) to the Headboard (A) and
3.
Footboard (B) by sliding it onto the bed fitting, as shown below.
Adjust the levelers underneath each support leg (F) to keep the whole bed level
NOTE: The Bed can be used with or without a trundle. The position of center rail (E) will be
determined depending on which option you choose.
a. Option 1 – Without a Trundle: center rail attach to the metal bracket at the middle of the
Headboard (A) and Footboard (B).
b. Option 2 – With a Trundle: center rail assembled at one side of the Headboard (A) and
Footboard (B). Follow below steps:
- Remove the metal bracket on headboard and footboard by unscrew the wood screw
- Align the metal bracket over the pre-drilled holes at one side of the headboard and footboard and
then secure again with original wood screw
- Attach the center rail to the metal bracket
Date: 2016-Jan.-16
Rev: 2016 03 11
E
C
Page 4 of 6
Advertisement
