Related Manuals for pottery barn kids PLAYHOUSE LOFT BED
Summary of Contents for pottery barn kids PLAYHOUSE LOFT BED
- Page 1 PLAYHOUSE LOFT BED www.potterybarnkids.com Date: 2015- Jun.-18 Page 1 of 8 Rev: 2015-Oct.-22...
- Page 2 DO NOT use bunk bed if any parts are missing or broken. • DO NOT use substitute parts. Contact Pottery Barn Kids for replacement parts and instructional literature if needed. • Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly recommended. Keep instructions for future use. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item. - Page 4 Allen Bolts (L) Allen Bolts (M) Allen Bolts (N) Spring washer ( K) 5/16” -20x 5/16” x110mm 5/16” x 76mm– 4x 1/4” x 25mm– 12x ( O) Flat washer (P) Spring washer (Q) Flat washer Barrel Nuts 5/16” x15x12mm - 16x 1/4”...
- Page 5 2. Attach (F) to (C), as shown below. Do not over tighten. 3. Attach (G) to (C), as shown below. Do not over tighten. Date: 2015- Jun.-18 Page 5 of 8 Rev: 2015-Oct.-22...
- Page 6 ) to (D&E), as shown below. 4. Attach (A&B Note: Loosely tighten all bolts (L&K) to make the assembling of front gate easier. 10 x 5. Attach assembled front gate to (A&B),as shown below. 6. Check alignment and fully tighten all bolts (L& K) at this time. Do not over tighten.
- Page 7 7. Extend and place the Slat Roll (J) to bed frames. Secure the slats as shown below. Do not over tighten. 28 x 8. Adjust the levelers on the bottom of the unit (up or down) to level the bed, as seen below. Date: 2015- Jun.-18 Page 7 of 8 Rev: 2015-Oct.-22...
- Page 8 Assembly now is completed. Care Instructions: Dust often using a clean, soft, dry and lint-free cloth. Blot spills immediately and wipe with a clean, damp, cloth. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.