Using The Soundbar Remote Control; Inserting Batteries Before Using The Remote Control; Batteries X 2); How To Use The Remote Control - Samsung HW-Q930C Full Manual

03 USING THE SOUNDBAR REMOTE CONTROL

Inserting Batteries before using the Remote Control (AAA batteries X 2)
Slide the back cover in the direction of the arrow until it is completely removed. Insert 2 AAA batteries
(1.5V) oriented so that their polarity is correct. Slide the battery cover back into position.

How to Use the Remote Control

1
2
4
5
6
7
SOUNDBAR
1
Power
3
2
Source
8
9
10
3
11
Bluetooth PAIR
12
4
13
Mute
5
SOUND MODE
6
CH LEVEL
Turns the Soundbar on and off.
• Auto Power Down Function
The unit turns off automatically in the following situations:
• In D.IN / HDMI / Wi-Fi / BT mode if there is no audio signal for
18 minutes.
Press to select a source connected to the Soundbar.
• Voice Feedback On/Off
You can turn on or off the Voice Feedback.
Press and hold the (Source) button on the remote control for
5 seconds while the Soundbar is off (Standby mode).
Each time you change the Voice Feedback setting, the OLED Display
will show "AUI OFF" (Default) or "AUI ON".
Switch the Soundbar to Bluetooth pairing mode. Press the button and
wait for the "BT PAIRING" screen to connect to a new Bluetooth device.
Press the (Mute) button to mute the sound.
Press it again to unmute the sound.
By pressing the button, you can select the desired audio mode such as
Surround, Game Pro, Standard, Adaptive Sound.
• Standard
Outputs the original sound.
• Surround
Provides a wider sound field than standard.
• Game Pro
Provides stereoscopic sound to immerse you in the action while
gaming.
• Adaptive Sound
Analyzes the content in real time and automatically provides the
optimal sound field based on the characteristics of the content.
By pressing the button, you can adjust the volume of the each speaker
such as Center level, Side level, Wide level, Front Top level, Rear level,
and Rear top level.
• To control the volume of the each speaker select Center level, Side
level, Wide level, or Front Top level in Sound Settings, and then adjust
the volume between -6~+6 by using the Up/Down buttons.
• If Surround Speakers are connected, select Rear level or Rear top
level and then use the Up/Down buttons to adjust the volume within
a -6 to +6 range.
• CH LEVEL specifications may differ with the respective model.
ENG - 6