Hisense 43A6GV Quick Setup Manual page 8

Attach the wall mount bracket (not included)
Before you begin the third-party
manufacturer instructions, be sure to do
the following things:
1. Place the TV face down on a clean,
safe and cushioned surface.
2. Remove the TV stand if you have
already attached it.
3. Place spacers (not included) in the
corresponding bracket holes.
CAUTION:
• Follow instructions provided with the wall mount bracket. If it is not correctly mounted,
the TV may fall and cause property damage or personal injury.
• When you attach the mount, be sure to use spacers (provided by the third-party
manufacturer) between the TV and the bracket.
• To prevent internal damage to the TV and to ensure it is mounted securely, be sure
to use fixing screws (not included) that are 8.0 - 10.0 mm (43"/50"/55")(109.2 cm/127.0
cm/139.7 cm) or 9.5 - 11.5 mm (65")(165.1 cm) in length when measured from the
attaching surface of the rear cover.
8.0 - 10.0 mm (43"/50"/55")(109.2 cm/127.0 cm/139.7 cm)
9.5 - 11.5 mm (65")(165.1 cm)
Wall mount bracket
Screw
Spacer
Rear cover of the TV
• We do not recommend hanging the TV on a slanted wall, and
when wall mounting make sure your television remains
parallel to the wall and does not lean forward.
NOTE:
• If you have additional questions, please contact the wall mount manufacturer or the
retailer from which you purchased the TV.
• The diameter and length of the screws differ depending on the wall mount bracket model.
(not included)
Wall mount hole pattern(mm)
Wall mount screw size
6
Spacer
Bracket
(not included)
200 × 300 (43"/50"/55")(109.2
cm/127.0 cm/139.7 cm)
400 × 300 (65")(165.1 cm)
M6
Vertical
surface
TV
screen
Screw
(not included)