Hisense 43A6GV Quick Setup Manual page 17

Automatically obtain an IP address
1. If you connect to the wired network, the TV will automatically obtain an IP address
and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails, disconnected message will display for the Ethernet status.
Retry or enter the IP Settings, and select Manual to input the information again.
Manually enter the IP address
1. Enter the IP Settings to select Manual.
2. Enter the IP Address, Netmask, Gateway, DNS Server 1 and DNS Server 2 in the
menu.
Establish a wireless network connection
The TV can directly receive network signals via wireless router. Before you establish a
wireless network connection, turn on your Wi-Fi.
The TV can directly receive network signals via wireless router.
1. Choose Wireless among Connection Select modes, and the list of networks will
display on screen automatically.
2. Select a wireless network from the list, and enter password.
3. If you couldn't find your network, select Refresh to get the lastest list. Alternatively,
you can select Add to input a Wi-Fi name, select the type of security mode, and enter
password.
Close the network connection
Unplug the network cable or turn off your Wi-Fi. The network connection will close.
Wireless LAN Adapter
built-in TV set
15
Wireless router with DHCP
LAN Cable