Getting started
Step 1. Attach stand or mount
Before you start using your TV, attach your TV stand or mount it on the wall.
CAUTION:
• Disconnect the AC power cord before installing a stand or a wall mount bracket.
• The LED display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Attach the TV stand
To attach the TV stand legs to your TV:
1. Carefully place your TV face down on a clean, soft and flat surface.
2. Insert the TV base stands into the bottom slots on your TV.
3. Use the screws provided to secure each leg tightly.
43
/50
/55
(109.2 cm/127.0 cm/139.7 cm)
"
"
"
Base Stand
Base Stand
Screws:
M4×16 (43")(109.2 cm)
M4×12 (50"/55")(127.0 cm/139.7 cm)
Screws:
M4×16 (43")(109.2 cm)
M4×12 (50"/55")(127.0 cm/139.7 cm)
4