SWITCHING POWER ON/ OFF
Press and hold [
•
A beep sounds and the display illuminates.
•
If the Power-on tone select is set to OFF, the beep will not sound.
•
If the Transceiver Password function is programmed, "PASSWORD" will appear
on the display. Refer to "Transceiver Password", on
Press and hold [
ADJUSTING THE VOLUME
Press the buttons programmed as [Volume Up] button to increase the volume.
Press the buttons programmed as [Volume Down] button to decrease the volume.
SELECTING A ZONE AND CHANNEL
1
Select the desired zone using the buttons programmed as [Zone Up]/ [Zone
Down].
•
Each zone contains a group of channels.
2
Select the desired channel using the buttons programmed as [Channel Up]/
[Channel Down].
•
Each channel is programmed with settings for transmitting and receiving.
•
The transceiver may have names programmed for zones and channels.
The zone name and channel name can contain up to 10 characters
respectively. While selecting a zone, the zone name appears for 2 seconds
(if Zone Name Display is set), then channel name appears.
BASIC OPERATIONS
] to switch the transceiver power ON.
] again to switch the transceiver power OFF.
{page
15
70}.