Kenwood NX-1700N-C User Manual page 75

SCRAMBLER (ANALOG)/ ENCRYPTION (NXDN/ DMR)
Note:
◆ The following types of encryption are available depending on the protocol used.
NXDN : Bit scrambling (built-in encryption function)
DMR : Bit scrambling (built-in encryption function) and Enhanced Encryption
◆ The Enhanced Encryption is a software option. Ask your dealer for details
concerning the Enhanced Encryption settings.
SECURE (ENCRYPTED) TRANSMISSION
Press the button programmed as [Scrambler/ Encryption] to switch the
transceiver to secure (encrypted) transmission.
Alternatively, press the button programmed as [Menu] to enter Scrambler/
•
Encryption Mode using the Menu Mode.
• The Scrambler/ Encryption indicator
ON.
Pressing the PTT switch after the Scrambler or Encryption function has been
•
turned ON encrypts the transmitted signal.
SELECTING THE SCRAMBLER CODE
1 Press the button programmed as [Scrambler/ Encryption Code] to enter
Scrambler/ Encryption Code Mode.
Alternatively, press the button programmed as [Menu] to enter Scrambler/
•
Encryption Code Mode using the Menu Mode.
2 Press the [ <B ] and [ C> ] buttons to increase or decrease the Scrambler
code.
• Up to 16 Scrambler codes can be used.
3 Press the [ S ] button to set the new Scrambler code.
" " appears when the function is turned
75