eXact LEADQuick Smart Manual page 9

MERCURY IN WATER TEST PROCEDURE
7
DIP STRIP AND PRESS READ
DIP
and immediately press
20-second countdown timer. Use a gentle
constant back and forth motion (2 strokes per
second) until the timer displays "1". Be careful to
not spill the sample from the CELL. Remove and
discard the strip. The display will begin counting
up from 1 to 60. After the 60-second count-up,
the meter will automatically zero and display 0μg.
7
DIP STRIP AND PRESS READ
DIP
and immediately press
20-second countdown timer. Use a gentle
constant back and forth motion (2 strokes per
second) until the timer displays "1". Be careful to
not spill the sample from the CELL. Remove and
discard the strip. The display will begin counting
up from 1 to 60. After the 60-second count-up,
the meter will display the fi nal results.
FILL, DIP, READ
the eXact Strip Micro Pb-3 into the CELL
the eXact Strip Micro Pb-4 into the CELL
leadquickmeter.com
. This starts the
. This starts the
9