Table of Contents
Advertisement
Caution
Be sure no power is applied to the chassis or circuit, and observe
all other safety precautions.
8. Minimize bodily motions when handling unpackaged replacement
ES devices. (Otherwise hamless motion such as the brushing
together of your clothes fabric or the lifting of your foot from a
carpeted floor can generate static electricity (ESD) sufficient
todamage an ES device).
4. PRECAUTION OF LASER DIODE
5. SERVICE CAUTION BASED ON LEGAL
RESTRICTIONS
5.1. General description about Lead Free Solder (PbF)
The lead free solder has been used in the mounting process of all electrical components on the
printed circuit boards used for this equipment in considering the globally environmental
conservation.
The normal solder is the alloy of tin (Sn) and lead (Pb). On the other hand, the lead free solder is
the alloy mainly consists of tin (Sn), silver (Ag) and Copper (Cu), and the melting point of the
lead free solder is higher approx.30°C (86°F) more than that of the normal solder.
Definition of PCB Lead Free Solder being used
9
Advertisement
Table of Contents
