System Configuration - Advantech MIT-W102 Series User Manual

• MIT-W102 Tablet PC
• AC power adaptor
• Battery Pack
Warning! To prevent electric shock, Do not remove cover.
Warning!
1. Input voltage rated 100-250 VAC, 50-60 Hz, 1.5-0.75 A, Output
Voltage rated 19 VDC , max 3.15 A
2. Use a 11 Vdc @ 2860 mA lithium battery
3. Maintenance: to properly maintain and clean the surfaces, use
only approved products or clean with a dry applicator
Caution! 1. Do not replace battery yourself. Please contact a
qualified technician or your retail provider.
2. The computer is provided with a battery-powered real-time clock
circuit. There is a danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type recommended
by the manufacturer. Discard used batteries according to the
manufacturer's instructions.
No user serviceable parts inside, refer servicing to qualified
personnel.

1.4 System Configuration

The block diagram of a MIT-W102 tablet computer is shown in the following
diagram:
16