HAMPTON BAY MILLSTONE FCA65098HB-ST Use And Care Manual page 5

l
Chair Assembly
1
Connecting the right chair arm, chair back, and front bar
Place the right arm (A) on a soft surface.
Attach the chair back (C) to the right arm (A) by inserting M6x40 bolts (AA) and M6 washers (DD) through each of the two holes in
the chair back (C) and the rear of the right arm (A). Bolt heads should face in towards the chair back (C).
Attach the front bar (E) by aligning the holes of the front bar (E) with the holes in the rear portion of the right arm (A).
Secure the front bar (E) to the right arm (A) with an M6x15 bolt (CC) and M6 washers (DD).
NOTE: Loosely tighten all bolts using the hex wrench (HH).
AA
DD
C
C
A
A
5
Please contact 1-877-527-0313 for further assistance.
AA
DD
C
A
E
DD CC
HAMPTONBAY.COM