Returning The Network Function Setting Back To The Factory Setting - Panasonic PT-D7000E Operating Instructions Manual

Returning the network function setting back to the
factory setting
Using the following procedure, the user can return all settings of network function such as IP address,
password and Email setting to the factory setting.
Procedure of setting
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
:MENU SELECT
ENTER:SUB MENU
OPTION
PROJECTOR ID
SETTING FRONT-F
LAMP SELECT DUAL
LAMP POWER HIGH
RS232C SETTING
OSD POSITION
SYSTEM INFORMATION
COLOR MATCHING 3COLORS
VIDEO SETTING
NETWORK SETTING
:MENU SELECT
ENTER:SUB MENU
NETWORK SETTING
HOST NAME PROJECTOR
DHCP OFF
IP ADDRESS 192.168.
PORT
NET MASK 255.255.255.
GATEWAY 192.168.
MAC ADDRESS 00.00.00.00.00.00
STORE
:MENU SELECT
ENTER:ADJUST
WOULD YOU LIKE TO CANCEL
ALL NETWORK SETTINGS BACK TO
FACTORY SHIPMENT STATUS?
OK
:CHANGE ENTER:SET
2
2
0. 8
80
0
0. 1
ESC
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the "ENTER" button.
The OPTION screen will be displayed.
Select "NETWORK SETTING" with the
buttons.
Press the "ENTER" button.
The NETWORK SETTING screen will be
displayed.
Select "STORE" with the
buttons.
Hold down the "Standard (STD)" button
for 3 seconds.
A confirmation screen will be displayed.
To cancel, press the "MENU" button. The
NETWORK SETTING screen will be displayed.
Press the "ENTER" button.
The IP address, password, E-mail settings and all
the other network function settings are returned to
the factory defaults.
95