Table of Contents
Advertisement
Replacement of lamp unit
8. Insert the power cord plug into the wall outlet and then press the MAIN POWER
switch.
Caution
• If the power does not turn on (power indicator lamp (red) does not turn on) even after turning the
MAIN POWER switch "I", turn the MAIN POWER "
installed correctly, and turn on again.
9. Press the "I" (POWER) button so that a picture is projected onto the screen.
10. Press the "MENU" button to display
the MAIN MENU screen, and then
press the
the cursor to select "OPTION".
11. Press the "ENTER" button to display
the "OPTION" screen, and select
"SYSTEM INFORMATION" with the
and
buttons.
12. Press the "ENTER" button.
The SYSTEM INFORMATION screen will be
displayed.
13. Press and hold the "ENTER" button
on the projector or the remote control
for approximately 3 seconds.
An item "LAMP RESET" will be added.
14. Select the lamp which has been
replaced with the
LAMP1: Replace the LAMP UNIT 1
LAMP2: Replace the LAMP UNIT 2
15. Press the "ENTER" button. When
"OK?" is displayed, press the
"ENTER" button.
The used hours of the specified lamp unit will be
reset to zero.
When more than one lamp has been replaced,
repeat the procedure from step 14.
100
and
buttons to move
and
buttons.
O
", confirm that the lamp unit and door are
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
SECURITY
OPTION
PROJECTOR ID
2
SETTING
FRONT-F
LAMP SELECT
DUAL
LAMP POWER
HIGH
RS232C SETTING
OSD POSITION
2
SYSTEM INFORMATION
COLOR MATCHING
3COLORS
VIDEO SETTING
AUTO SETUP
:MENU SELECT
ENTER:SUB MENU
SYSTEM INFORMATION
ROM VERSION:
SET RUNTIME:
LAMP1
TYPE:
LOW:
HIGH:
TOTAL:
LAMP2
TYPE:
LOW:
HIGH:
TOTAL:
LAMP RESET
LAMP1
LAD7700
1433h
LAD7700L
0h
LAMP2
LAD7700
1100h
LAD7700L
0h
:SELECT
ENTER:EXECUTE
LAMP RESET
LAMP1
LAD7700
1433h
LAD7700L
0h
LAMP2
LAD7700
1100h
LAD7700L
0h
1.00
1433h
LAD7700
0h
1433h
1433h
LAD7700
0h
1100h
1100h
OK?
Advertisement
Table of Contents
