Table of Contents
Advertisement
HOW TO USE THE MICROWAVE
Pre-set cooking time function
You can set your microwave to start cooking at a pre-set time, without the
need to be present to input the programme at the time of cooking. Make
sure your food is in the microwave and prepared when you programme the
pre-set function.
You will need to set the clock and set the cooking menu and time.
Input the cooking programme.
Note: A maximum of two stages can be set. Do not use the defrost function
in the pre-set function. The auto menu can be set for a single stage only.
For example, if you want to cook with 80% power for 7 minutes:
1. Press the "MICROWAVE" button once.
2. Turn the "TIMER/WEIGHT/AUTO MENU" dial to choose 80% microwave
power till "P80" is displayed.
3. Press "START/+30SEC/CONFIRM" button to confirm.
4. Turn "TIMER/WEIGHT/AUTO MENU" dial to adjust the cooking time to 7
minutes.
5. DO NOT press "START/+30SEC /CONFIRM" button.
6. Press the "CLOCK/PRE-SET" button, the current time displays and the
hour figures flash.
7. Turn "TIMER/WEIGHT/AUTO MENU" dial to adjust the hours; the input
time should be within 0-23 or 1-12, e.g. 18.
8. Press "CLOCK/PRE-SET" button and the minute figures will flash.
9. Turn the "TIMER/WEIGHT/AUTO MENU" dial to adjust the minutes; the
input time should be within 0-59, e.g. 00.
10. Press "START/+30SEC/CONFIRM" to finish setting.
The colon ":" will illuminate, the buzzer will ring twice when the set start
time arrives, then the cooking will start automatically.
Note: The clock must be set first, otherwise the pre-set function will not
work.
27
Advertisement
Table of Contents
