Table of Contents
Advertisement
Available languages
Available languages
Unlocking of the sensors.
1. Check that the appliance is switched on.
2. Touch and hold the key lock for some time..
3. Now you can proceed operation as normal.
A thermistor monitors the temperatures inside the appliance. The appliance stops
operating automatically if an over-temperature is detected.
The cooking zones emit residual heat after operation. An H displayed is the
standard warning symbol.
The automatic switch-off represents another safety component of your appliance.
The automatic switch-off is activated, when you forgot to switch off a cooking
zone after operation. The default times are described on the schedule below.
Power level
Automatic switch-off (hours) 8
You can use the timer in 2 different modes:
1. As a minute minder. The timer does not switch off a cooking zone.
2. As an automatic switch-off function. The timer switches off a cooking zone as
soon as the set time has elapsed
You can set the timer up to 99 minutes.
Mode 1 - Minute minder
1. Switch on the appliance (you can use the minute minder even you have not
selected a cooking zone).
2. Touch the
sensor.
3. Set the desired time by touching the
Each touch increases/decreases the value by 1 minute.
Over-temperature protection
Residual heat warning
Automatic switch-off
1
Timer
36
2
3
4
5
8
8
4
4
or
sensors.
6
7
8
9
4
2
2
2
Advertisement
Table of Contents
