yuna EBK4/2B Instruction Manual page 35

2. Place a cookware on the desired cooking zone. Always keep
the bottom of the cookware as well as the cooking zone clean
and dry.
3. Touch the relevant
Select the power level by touching the
When you do not select a level within 1 minute, the appliance
is switched off automatically. You have to start again at step 1.
You can change the setting of the power level at any time
while cooking.
4. Touch the
the sensor to activate the additional cooking zone. The
LED-indicator to the right of the
1. Switch off the entire appliance with the ON/OFF sensor.
2. Beware of the hot surfaces of the cooking zones!
An H indicates which cooking zones are still hot. The H
disappears as soon as the relevant cooking zone has cooled
down. You can use the H for saving energy → you can start
a new cooking procedure on a cooking zone, which is still
warm/hot.
You can lock the sensors to protect them from unintentional operation or
operation by children. When the sensors have been locked, all sensors except
ON/OFF are deactivated. You can switch off the appliance with the ON/OFF
sensor in case of emergency, but you should unlock the sensors afterwards.
Locking of the sensors.
Touch the key lock. The timer indicator displays "Lo".
Child protection: When you lock the sensors before switching off the
appliance, they are still locked when switching on the appliance again.
sensor to select a cooking zone.
or sensor of a dual cooking zone and then
When you have finished cooking
Key lock
or sensor.
sensor goes on.
35