Toto TES201A Series Installation And Owner's Manual page 9

INSTALLATION PROCEDURE - Controller
3. Position and anchor the bracket with two
screws.
4. Hang the controller on the mounting bracket
and anchor the bottom anchoring plate with
one screw.
* Sandwich the grounding wire with the
mounting bracket and anchor them with screw.
Installing the controller on a wooden
wall or dry wall
Confirm that the wooden wall has a structure that
can sustain the weight (4.41lb) of the controller
(Triple type). (In the case of dry wall, in order to
hold the controller, make sure the plywood base
is more than 1/2" (13 mm) thick.) Anchor the
mounting bracket with two screws and anchor the
anchoring plate with one screw. Reinforce the wall
structure sufficiently as needed.
Caution
 Install the unit body horizontally.
 Pay attention not to pinch of the electric cord or
contact it with edges.
Dimensions
[ 0.8 gallon (3L) Tank Type ]
1'' 3-3/4''
(25 mm) (94 mm)
1-7/8''
(47 mm)
2-7/8'' 2-7/8''
(72 mm) (72 mm)
[ 0.26 gallon (1L) Tank Type (special order)]
1''
(25 mm)
Controller
Screw
4-1/2''
(113.5 mm) (94 mm)
1-3/4'' 4-5/8''
(43.5 mm) (117 mm)
9
(Continued)
Screws
Mounting bracket
Anchoring plate
(Unit: Inch (mm))
3-3/4'' 1''
(25 mm)
1-7/8''
(47 mm)
2-7/8''
(72 mm)