JVC XU-301BKJ Instructions Manual page 50

8
3
CD
2
CD
1
CD
STANDBY
POWER
Lamp lights.
STANDBY STANDBY
POWER POWER
CANCEL
48
Timer Play (wake-up play)
XU-301 MD-CD COMBINATION DECK
3 CD
-
PLAY & EXCHANGE
TIMER CD PITCH CONTROL
/CLOCK 1st TRACK LISTENING
REC EDIT
NORMAL SPEED
CD REC SKIP
Continued from page 47 (while "PLAY?" is flashing)
6 Press the SET button.
SET
• When "REC?" flashes, turn the jog dial to select "PLAY?" flashing.
• The timer programming is displayed once, and then the function display is restored.
7 Set the function to "CD" or "MD"—whichever disc is to be heard—
and place the MD or CD in position.
• When MD play is set.
MD
8 Turn off the power.
The present time now appears in the display window.
Match the connected receiver or other source with the unit's setting, and adjust the volume to the
appropriate level. Match the timer with the unit's timer setting.
Timer play now starts at the programmed start time, and the power is turned off at the programmed
end time.
• Clearing a timer operation
Turn on the power, press the TIMER/CLOCK button, select the timer mode, and press the CANCEL
button.
The DAILY 3 (or ONCE 3) display is cleared, and the timer operation is also cleared.
DIGITAL INPUT
32kHz 44.1kHz 48kHz
MIXING
REC REC REC
DIGITAL CD LINE MIC
PAUSE START STOP
REC SOURCE SELECTOR
SAMPLING RATE CONVERTER
This display appears when the
DAILY TIMER play mode is set.
DAILY The timer programming is displayed once,
and then the function display is restored.
• When CD play is set.
Place the MD to be
heard in position.
•
•
•
(continued)
7 6
DISPLAY
EDIT TITLE /CHARA PLAY MODE
CANCEL SET
MIX BALANCE REC LEVEL
CD
MD
LINE CD MIN MAX
MIC LINE
MIC PHONES
CD CD
Place the CD or CDs to be
heard in position on the CD1,
CD2 and/or CD3 tray.