Panasonic KX-TH1211 Operating Instructions Manual page 53

Link-to-cell bluetooth convergence solution with 2 handsets
Hide thumbs Also See for KX-TH1211:
Table of Contents

Advertisement

Problem
The 2nd caller's information is
not displayed during an outside
call.
Liquid damage
Problem
Liquid or other form of moisture
has entered the handset/base
unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying
process.
PIN for cellular phone registration
Problem
I cannot remember the PIN.
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L In order to use Caller ID, call waiting, or Call
Waiting Caller ID (CWID), you must first
contact your service provider/telephone
company and subscribe to the desired
service.
After subscribing, you may need to contact
your service provider/telephone company
again to activate this specific service, even if
you already subscribed to both Caller ID and
Call Waiting with Caller ID services (CWID).
Cause/solution
L Disconnect the AC adaptor and telephone line
cord from the base unit. Remove the batteries
from the handset and leave to dry for at least
3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and
telephone line cord. Insert the batteries and
charge fully before use.
Cause/solution
L Change the PIN using the following method.
1
{MENU} i {#}{1}{3}{2}
2
{*}{7}{0}{0}{0}
3
Enter the new 4-digit PIN. i {Save} i
{OFF}
Useful Information
53

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-th1212bKx-th1211bKx-th1212Kx-tg1212

Table of Contents