Panasonic KX-TH1211 Operating Instructions Manual page 52

Useful Information
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
The caller list/incoming phone
numbers are not edited
automatically.
I cannot dial the phone number
edited in the caller list.
Time on the unit is shifted.
52
For assistance, please visit http://www.panasonic.com/help
Cause/solution
L You need to subscribe to Caller ID service.
Contact your service provider/telephone
company for details.
L If your unit is connected to any additional
telephone equipment such as a Caller ID box
or cordless telephone line jack, plug the unit
directly into the wall jack.
L If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.
L The name display service for landline calls
may not be available in some areas. Contact
your service provider/telephone company for
details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.
L Depending on your service
provider/telephone company, the unit may
display or announce the caller's information at
2nd ring or later.
L Move closer to the base unit.
L The handset ringer volume is turned off.
Adjust it (page 29, 30).
L The Talking Caller ID feature is turned off.
Turn it on (page 28).
L The Caller ID number auto edit feature is
turned off. Turn it on and try again (page 28).
L You need to call back the edited number to
activate Caller ID number auto edit.
L The phone number you dialed might have
been edited incorrectly (for example, the long
distance "1" or the area code is missing). Edit
the phone number with another pattern (page
37).
L Incorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to off (page 30).