Nedis TVRC2110BK - Universal Remote Control Quick Start Guide

Table of Contents

Description

On/off button	Switch on or off the device	Mute button LED indicator	Mute or unmute the sound
Digit buttons	Select stored stations	Back button	Go back
Guide button	Electronic program guide (EPG)	Volume +/- buttons	Increase or decrease the volume
Channel +/- buttons	Next or previous channel	Menu button	Display the menu
Exit button	Exit	List button	List function
AV button	Audio/Video	PIP button	Picture-in-picture (PiP)
Zoom button	Zoom function	Arrow buttons	Navigation
OK button	Confirm	Teletext button	Teletext
Display button	Display function	TV button	TV function
Sleep button	Sleep mode	Colour buttons	Individual button configurations
Record button	Record	Play button	Start playback
Pause button	Pause playback	Stop button	Stop playback
Fast-forward button	Fast-forward playback	Rewind button	Rewind playback
Next button	Next channel or menu item	Previous button	Previous channel or menu item
TV button	TV media selection	M1/M2 button	M1/M2 media selection
Favourite button	Favourites	Battery compartment	Insert the batteries (2x AAA) into the battery compartment.

Switch on the device to be programmed.
Find the correct brand of the device in the code list. Make a note of the first code in the code list.
Press and hold the required device button (TV) until the LED indicator comes on.
Enter the previously identified code.
Note: If the LED indicator goes off, the code has been accepted. If the device is switched on or off, the code is correct. If the device is not switched on or off, repeat the previous steps using another code.

Switch on the device to be programmed.
Press and hold the required device button (TV) until the LED indicator comes on.
Point the remote control to the device. Press and slowly release the on/off button. Note: If the device is switched off, the code has been found.
Immediately press the required device button (TV) to confirm the code.
Note: For buttons that do not operate correctly, repeat the previous steps until the correct code is found.

Read the manual carefully before use. Keep the manual for future reference.
The manufacturer is not liable for consequential damages or for damages to property or persons caused by nonobservance of the safety instructions and improper use of the device.
Only use the device for its intended purposes. Do not use the device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective. If the device is damaged or defective, replace the device immediately.

Use only the batteries mentioned in the manual.
Do not use old and new batteries together.
Do not use batteries of different types or brands.
Do not install batteries in reverse polarity.
Do not short-circuit or disassemble the batteries.
Do not expose the batteries to water.
Do not expose the batteries to fire or excessive heat.
Batteries are prone to leakage when fully discharged. To avoid damage to the product, remove the batteries when leaving the product unattended for longer periods of time.
If liquid from the batteries comes into contact with skin or clothing, immediately rinse with fresh water.

Do not use cleaning solvents or abrasives.
Do not clean the inside of the device.
Do not attempt to repair the device. If the device does not operate correctly, replace it with a new device.
Do not immerse the device in water or other liquids.
Clean the outside of the device using a soft, damp cloth. Thoroughly dry the device with a clean, dry cloth.