Nedis RFRC410WT, RFRC220WT - RF Smart Remote Control Quick Start

Intended use

The Nedis RFRC410WT I RFRC220WT is a radio frequency remote control for Nedis RF Smart products.

The product is exclusively intended for controlling Nedis RF Smart products.

The product is intended for indoor, domestic use only.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Main parts

(image A)

1. On button channel 1
2. Off button channel 1
3. On button channel 2
4. Off button channel 0
5. On button channel 3
6. Off button channel 3
7. On button channel 4
8. Off button channel 4
9. On button all channels
10. Off button all channels
11. Battery cover
12. Battery
13. Led indicator light

Safety instructions

• Only use the product as described in this manual.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective device immediately.
• Do not open the product.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Disconnect the product from the power outlet and other equipment if problems occur.
• Keep the product out of reach from children.

Pairing to a Nedis RF Smart Product

1. Hold the product close to a Nedis RF Smart product.
2. Activate the pairing mode of the Nedis RF Smart product (see the manual of the Nedis RF Smart product in question).
3. Press the ON button channel 1 A to connect the Nedis RF Smart product to channel 1.
4. Repeat step 1 to 3 with A to connect more products.
5. Press A or A to switch all connected products on or off.

A receiver can be paired to up to 5 different transmitters.

Do not pair two dimmable receivers or a dimmable and an on/off receiver to the same channel of a transmitter.

Using the product

When the Nedis RF Smart product is connected to channel 1, you can control the product with A or A.

For channel 1:

• Press A to switch on the connected Nedis RF Smart product.
• Press A to switch off the connected Nedis RF Smart product.

Controlling the light level of a dimmable lamp

1. Press A to switch on the lamp.
2. Press A again. The lamp will automatically decrease and increase in brightness.
3. Press A to select the desired brightness.

Controlling the light level of all assigned lamps

1. Press A to switch on the lamp.
2. Press A again. The lamp will automatically decrease and increase in brightness.
3. Press Ato select the desired brightness.

Specifications

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product RFRC410WT I RFRC220WT from our brand Nedis^®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: webshop.nedis.com/rfrc410wt#support webshop.nedis.com/rfrc220wt#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28
5215 MC 's-Hertogenbosch, the Netherlands