Clock Setting; Date And Time - Panasonic KX-TGA272S Operating Instructions Manual

Clock Setting

Date and Time

Make sure the handset is not being used.
1 Press
(SNOOZE/ALARM)
• "Set date & time" is displayed if the clock
has not been set yet.
2 Enter the year, month, day and time using
, and
Ö Ñ
•You can scroll to the desired number by pressing
Ö or Ñ. To move forward, press á.
To move backward, press Ü.
•If you enter a wrong year/month/day/time, move
to the desired field by pressing Ü or á, then
correct it by pressing Ö or Ñ.
•You can also enter the year, month, day and
time using the dialing buttons ((0) to (9)).
Select "AM" or "PM" by pressing
3
•You can also press (*) to select "AM" or "PM".
4 Press the soft key (
•A beep sounds and the clock starts working.
•If 3 beeps sound, the setting is invalid. Start again from step 2.
•To exit the programming mode, press (SNOOZE/ALARM) or (OFF)
•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or
.
(OFF)
•When entering the time using the dialing buttons, you cannot enter numbers
greater than 12. Do not use military time. (To set 13:00 hours, enter "0100",
and select "PM".)
To check the date and time
While the handset is not being used, press
(SNOOZE/ALARM).
•The date will be displayed above the time.
•The display will light for a few seconds. To make the
display stay lit with the handset on the charger while
not in use (standby mode), turn the LCD backlight
mode on (p. 20).
For assistance, please call: 1-800-211-PANA(7262)
.
.
á
).
SAVE
Ex. Handset on Charger
Set date & time
Date:2002.01.01
Time:12:00 AM
IH
Ex. Aug. 10, 2002, 9:30
Date:2002.08.10
Time:09:30 AM
IH
or .
Ö Ñ
Date:2002.08.10
Time:09:30 PM
IH
FUNCTION
AUG.10
11 : 30AM
Charging
S A V E
GF =Date&Time
GF =Date&Time
S A V E
GF =Date&Time
.
ALARM
11