Table of Contents
Advertisement
Programmable Settings
Auto Talk Feature
The Auto Talk feature allows you to answer a call by lifting the handset off
the charger without pressing
turn the feature ON. Your phone comes from the factory set to OFF.
Make sure the handset is not being used.
Press
1
(SNOOZE/ALARM).
•You can also press (CONF/FUNCTION) to
directly enter the function menu and go to step 3.
2
Within 5 seconds, press the soft key
(
FUNCTION
Scroll to "Initial setting" by pressing
3
or
Ö
Ñ
Scroll to "Auto talk" by pressing
4
, and press
Ñ
•The current setting is displayed.
5
Select "On" or "Off" by pressing
6
Press the soft key (
•A beep sounds.
•To exit the programming mode, press (SNOOZE/ALARM) or (OFF).
•You can exit the programming mode any time by pressing (SNOOZE/ALARM) or
.
(OFF)
•In order to view Caller ID information after you lift up the handset to answer a call,
leave the Auto Talk feature OFF.
Ringer Volume
You can program the ringer volume to HIGH, MEDIUM, LOW or OFF.
Your phone comes from the factory set to HIGH.
For KX-TG2700/KX-TG2730 users:
If set to OFF, the handset will not ring for external calls, and for internal
calls it will ring at the LOW level.
For KX-TG2720/KX-TG2740 users:
You can select the ringer volume for each line. If set to OFF, the handset
will not ring for the line(s). The ringer volume for internal calls follows the
higher level of the two lines. When the ringer volume is off for both lines,
the handset will ring at the LOW level for internal calls.
16
).
, and press
.
á
.
á
SAVE
or
. If you want to use this feature,
or
Ö
or
Ö
Ñ
).
FUNCTION
AUG.10
11 : 30AM
---------------
H
Save directory
Ringer setting
Copy directory
H
Initial setting
---------------
LCD setting
H
Auto talk
Room monitor
.
Auto talk
GF
ALARM
S A V E
:Off
Advertisement
Chapters
Table of Contents
