Break-In Operation - BorMann PRO BGB9600 User Manual

EN
(2) Loosen the bolt & open the cover to check the air cleaner.
(3) Checking the outside cover of nozzle, loosen the thumb nut and
open the cover.

Break-in operation

While your generator is still new, application of heavy loads may shorten the life of the engine. Follow the break-in procedures during
the first 20 hours.
(1) Avoid applying any heavy load during the break-in period.
(2) Change engine oil regularly.
Change the engine oil every 10 hours or one month after the initial use, and every 1,5 month or 40 hours thereafter.
Starting the generator
Recoil starting (manual start)
The engine is started in the manner described below.
1. Open the fuel cock (at the "ON" position).
2. Put the engine speed lever in the
position ). "RUN" position.
3. Pull out the recoil starting handle.
1. Pull out the handle to the point where your hands feel strong
resistant and then return it to the initial position.
10
WWW.NIKOLAOUTOOLS.GR
engine
speed
lever