Voice Memo; Remote Access Code; Remote Operation - Panasonic KX-TG7622B Operating Instructions Manual

Answering System for Landline
Key Operation
9 or Stop recording
MSTOPN Stop playback
0 Turn answering system off
Erase currently playing
*3
*4
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
*2 To resume playback:
MbN: "Playback" a MSELECTN
*3 You can also erase as follows:
MERASEN a MbN: "Yes" a
MSELECTN
Calling back (Caller ID
subscribers only)
If caller information is received for the
call, you can call the caller back while
listening to a message.
1
Press MPAUSEN during playback.
2
MbN: "Call back" a MSELECTN
Editing the number before calling back
1
Press MPAUSEN during playback.
2
MbN: "Edit & Call" a MSELECTN
3
Press MEDITN repeatedly until the
phone number is shown in the
desired format (page 51). a M
R To call back using a cellular line,
continue from step 2, "Making
cellular calls", page 24.
Erasing all messages
1
MMENUN#325
2
MbN: "Yes" a MSELECTN a MOFFN
60 For assistance, please visit http://www.panasonic.com/help

Voice memo

Available for:
KX-TG7641 series (page 3)
Recording a voice memo
You can use the base unit to leave a
voice memo (voice message) for
yourself or someone else (3 minutes
max.). Voice memos can be played back
later with the same operation used to
play back answering system messages.
1
MMEMON
2
After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the microphone.
3
To stop recording, press MnN
(STOP).

Remote operation

Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit's voice guidance prompts you to
press certain dial keys to perform
different operations.

Remote access code

A 3-digit remote access code must be
entered when operating the answering
N
system remotely. This code prevents
unauthorized parties from listening to
your messages remotely. The default
setting is "111".
Important:
R To prevent unauthorized access to
this product, we recommend that you
regularly change the remote code.
1
MMENUN#306