Card Installation - SMART Embedded Computing SE1700 Manual

Safety Notes
If your system is the only one in the rack, make sure to mount the system in the lowest part
of the rack. If several systems are installed in one rack, start with the heaviest component
at the bottom. If the rack is equipped with stabilizing devices, make sure that they are
installed and extended so that the rack is secure. Then proceed to mount or service the
system.
Do not put any load or pressure on the chassis during the installation process.
Make sure the chassis is secured in the rack before operation.
Personal Injury or System Damage
Use caution when pulling the system out of the rack, as it could fall and cause personal
injury.
Personal Injury
The system is heavy and improper handling may lead to muscle strain or back injury.
System Damage
During handling, shipping, and assembly, it is possible that pins, mounting screws, fans,
and other items became loose or damaged.
Do not operate a damaged system, as it may damage the devices that interface with the
system.
Personal Injury
High leakage current can be hazardous and cause injury.
Make an earth ground connection before connecting power to the PSU.
System Damage
Wrong jumper settings can make the system inoperable. Never change the settings of the
jumpers.

Card Installation

Damage of Circuits
Electrostatic discharge and incorrect product installation and removal can damage circuits
or shorten their life.
Before touching the product make sure that you are working in an ESD-safe environment.
Hold the product by its edges and do not touch any components or circuits.
8 SE1700 SMART Edge Server Safety Notes Summary (6806876A02B)
Safety Notes