Yamaha F130A Owner's Manual page 107

1
1. Water detection switch coupler
4. Remove the cover.
1
1. Cover
5. Remove the hose holder, and then re-
move the fuel filter from its holder.
1. Holder
2. Fuel filter
6.
ZMU08123
1. O-ring
2. Filter cup
3. Water detection switch lead
7.
8.
ZMU08139
1 1. O-ring
2. Filter cup
3. Water detection switch lead
2
ZMU08140 9.
10. Install the cover.
Trouble Recovery
Unscrew the filter cup, and then remove
the O-ring from the filter cup. NOTICE:
Be careful not to twist the water de-
tection switch lead when unscrewing
the filter cup.
[ECM01961]
3
Drain the water in the filter cup by soak-
ing it up with a rag.
Put the O-ring on the filter cup in its orig-
inal position, and then install the filter cup
onto the filter housing. NOTICE: Be
careful not to twist the water detec-
tion switch lead when screwing the fil-
ter cup onto the filter housing.
1
2
Fit the fuel filter into its holder, and then
fasten the hoses with the hose holder.
1
2
ZMU08141
[ECM01971]
3
ZMU08125
100