Step 5 - Configure The Computer's Network Settings - Omega O-DAQSCAN-2000 Series User Manual

STEP 5 – Configure the Computer's Network Settings
1. Open the Control Panel by navigating from the Windows Desktop as follows:
2. Double-click the "Network and Dial-up Connections" icon.
3. Double-click the "Network Connection" icon for the network that the Daq device is
4.
6-6 Configuring the System for Operation
Get user manuals: See SafeManuals.com
If using a LAN (Local Area Network), which has a DHCP server, skip this section
and continue with STEP 7 - Configure and Test the System using the
Daq*Configuration Applet (page 6-10).
If using a LAN (Local Area Network), which has no DHCP server, skip this
section and continue with STEP 6 - Configure Device Network Settings using
DaqIPConfig (page 6-9).
Start Menu ⇒ Settings ⇒ Control Panel.
connected to.
Local Area Connection Status
In the "Local Area Connection Status" box (previous figure), click on the <Properties>
button. The "Local Area Connection Properties" box will appear (following figure).
[Applies to "dedicated networks" only]
898195
DaqLab/2000 Series & DaqScan/2000 Series