Omega O-DAQSCAN-2000 Series User Manual page 38

Configure the Computer's TCP/IP settings as follows.
6-8 Configuring the System for Operation
Get user manuals: See SafeManuals.com
Make sure that each computer on the dedicated network has a unique
IP address. Make sure that the IP address of the acquisition device is also
unique. The computer and the device cannot use the same IP address.
Internet Protocol (TCP/IP) Properties
6. Select the "Use the following IP Address" radio button.
7. Set the IP address field to 10.0.0.x where x is some number from 1 to 255.
Make sure that each computer on the dedicated network has a unique
IP address.
8. Set the Subnet mask to 255.0.0.0. Note that the remaining fields can be left
unchanged.
898195
DaqLab/2000 Series & DaqScan/2000 Series