Step 4 - Power-Up The System - Omega O-DAQSCAN-2000 Series User Manual

STEP 4 – Power-up the System
DaqLab/2000 Series & DaqScan/2000 Series
Get user manuals: See SafeManuals.com
What you will need:
A 90 to 240 VAC power supply.
Your unit's power supply cord.
How to make the connection:
In the following steps we use the term "Daq Device" to mean a DaqLab/2000 Series device or
DaqScan/2000 Series device as applicable to your system.
1. Using the unit's power switch, turn the Daq device "OFF." The switch will be in the
"0" position and the power LED will be unlit.
2. Connect the power cord to the Power In connector on the Daq device.
3. Connect the plug to a standard AC outlet, or to the outlet of another reliable 90 to
240 VAC power supply.
4. If your power supply has a switch or breaker, close it to turn power "ON."
5. Turn ON the Daq device by placing its power switch to the "1" position. The unit's
power led will light up.
898195
Configuring the System for Operation 6-5